Solar Panel Scale Remover

The Solar Panel Scale Remover is specifically designed to remove hard water scale, rust, algae, sludge rust layers, and other deposits on the surface of photovoltaic (solar) panels caused by equipment such as boilers and cooling towers. It is suitable for deep cleaning and maintenance of various types of solar modules.

Deep Removal of Hard Water Scale

Targets scale buildup from long-term neglect, dissolving it within 5 minutes without mechanical scraping, significantly improving cleaning efficiency.

Coated Glass Protection

pH-balanced (weakly acidic; prompt rinsing required after use), it does not damage AR coatings (anti-reflective coatings). After cleaning, light transmittance is restored to over 90%, ensuring optimal power generation efficiency.

Manual Cleaning

Spraying: Apply the product evenly to the scale surface and let it sit for 5 minutes until the scale dissolves.

Wiping: Gently scrub with a soft cloth or sponge, then rinse with clean water and allow to air-dry.

Robotic Cleaning

Spraying: Use a low-pressure spray gun (≤0.3 MPa) to evenly coat the module surface.

Scrubbing: Employ a robot equipped with a rotating brush or high-pressure water jet (≤0.5 MPa) for scrubbing, increasing efficiency by 60%.

Rooftop solar Power Station for a Cosmetics Company

Severe scale contamination on solar panels near a cooling tower was significantly reduced after using this product, restoring light transmittance and power generation efficiency to normal levels.

Net Content: 20L

Pre-Use Test: Apply a small amount of the product to the deposit surface to observe any abnormal reactions. If no issues arise, proceed with large-area cleaning.

Precautions

Safety: This product is acidic and should not come into prolonged contact with skin. Wear protective gloves. If it enters the eyes, rinse immediately with water and seek medical attention.

Storage: Tightly seal the bottle after use to prevent freezing. If frozen, allow the product to return to the recommended storage temperature (5-35°C), mix thoroughly, and it will remain effective.

Storage Guidelines

Environment: Cool, dry place away from direct sunlight and rain.

Temperature: 5-35°C

Shelf Life: 2 years

The Solar Panel Scale Remover is an intensive cleaner designed specifically for hard water scale (e.g., calcium carbonate, calcium sulfate) on solar module surfaces. It can quickly dissolve scale without damaging coated glass, making it an ideal choice for solar power station maintenance.

Hot Tags: solar panel scale remover, China solar panel scale remover manufacturers, suppliers, factory, solar panel algae cleaner, solar panel maintenance cleaner, solar panel debris cleaner, solar panel scrubber, solar panel washing device, solar panel soot cleaner